Commercial Flashing

Copper Sealtite^® is the non-asphaltic version of our widely specified copper fabric flashing.  Copper Sealtite was the first laminated non-asphaltic copper flashing to be patented and offered to the construction industry back in 1999.  Copper Sealtite is compatible with a wide variety of sealants and most air barrier systems on the market today..

Copper Fabric flashing has a successful track record dating back over 100 years in the construction industry.  Copper is still the only known flashing material with a life of the wall, or 100 year warranty.  Copper Fabric flashing is still the best permanent choice for moisture protection.

Cop-R-Cote^® is manufactured from a full sheet of copper bonded on both sides with a special plasticized asphalt compound.

For close to 100 years copper flashing has proven itself as a long lasting, dependable thru-wall flashing. Cop-R-Kraft consists of a full sheet of copper bonded to a layer of waterproofed creped kraft paper with a plasticized asphalt compound. The 3oz weight is reinforced with glass fibers to meet the GSA, FHA and Corps or Engineers specifications. This strong, but flexible, masonry flashing will give you economical and permanent moisture protection.

Cop-R-Kraft Duplex is another non-asphaltic laminated flashing manufactured by Advanced Building Products.  Our most economical copper laminated flashing, Cop-R-Kraft Duplex is manufactured with a kraft paper coating allowing installers a cleaner product and reduced roll weight, which allows us to put more lineal footage on a roll which results in fewer lap joints.

Advanced Building Products now has light gauge, pre-fabricated Cop-R-Corner and end dam assemblies that make flashing into masonry corners an easy one-step operation. More and more masonry contractors, builders, and architects are realizing the importance of simplifying flashing installation. The cost savings realized with pre-fabricated corners and end dams add up quickly, and the watertight integrity they provide is invaluable.

Strip-N-Flash™ is a 40 mil thick membrane consisting of a 32 mil self adhering rubberized asphalt laminated to an 8 mil high density polyethylene film. A silicone release liner prevents the product from sticking to itself in the roll. Strip-N-Flash™ is available in 12", 16", 18", 24" and 36" widths. The factory-controlled quality assures uniform thickness on the job and the name Strip-N-Flash™ assures an excellent water barrier.