The Mortairvent® CW Mortar Deflection and Ventilation System

Additional Information

• Installation Video / Instructions
  • • Apply a water resistant barrier over sidewall sheeting. Check local building codes and specifications for more information.
    • Install Mortairvent® CW over installed rigid foam insulation board. Starting at the base of the wall unroll Mortairvent® CW from right to left between brick anchors with the three-dimensional (blue) polymer matrix side against the water resistant barrier and mortar deflection fabric facing exterior of building. Unroll the next course in the same manner as the first.
    • Be sure to always butt the blue polymer material together without overlapping.
    • Mortairvent® CW should be installed horizontally between brick ties as exterior brickwork is completed so as to maintain captivation within the brick anchoring system.
• Details & Renderings

  • 

    

• Jobsite Photo’s

  • 

    

• 3-Part Specification

  • Mortairvent CW – Guide Specification

• Data Sheets

  • Mortairvent CW Data Sheet

    Mortairvent CW Data Sheet (Spanish)

• AIS / SDS / MSDS / LEED Sheets

  • Mortairvent CW AIS Sheet

• Packaging

  • All-Wall Mortar Deflection/Ventilation	Thickness	Roll Size	Sq. Ft. Per Roll	Rolls Per Pallet	UOM
    Mortairvent®CW (cavity wall)	.40″	16″ x 40′	53	45	Sq. Ft.
    Mortairvent®CW (cavity wall)	.40″	39″ x 40′	130	18	Sq. Ft.
    Mortairvent®CW (cavity wall)	.80″	16″ x 50′	67	20	Sq. Ft.
    Mortairvent®CW (cavity wall)	.80″	39″ x 50′	163	8	Sq. Ft.
    Mortairvent®CW (cavity wall)	1.6″	16″ x 25′	33	20	Sq. Ft.
    Mortairvent®CW (cavity wall)	1.6″	39″ x 25′	81	8	Sq. Ft.

• Warranty

  • Polypropylene Products Warranty