Our pre-formed PVC weep screed flashing is used with masonry veneer or wood siding to facilitate moisture drainage. Located at the framed wall and foundation joint, the weep screed provides an egress for water that has penetrated the exterior finish, weeping from the walls by gravity to the screed. Made of exterior grate PVC, this design provides compliance with ASTM E2273 & E2925 for drainage and ventilation.
Mortairvent® Weep Screed comes in paintable white.
Available in paintable white with pre-punched holes for easy installation.
Mortairvent® Weep Screed should be installed at the plate line, or stem wall, providing a stop for Stucco, EIFS, Stone, or Stone Veneers. A traditional siding or roofing nail can be used to install this product properly.
All exterior accessories shall be of PVC material conforming to ASTM D1784, C1063 and D4216. They shall be used where specified by the architect and installed per industry standards.
3 1/2″ X 3/4″ X 10’ (Holes Pre–Drilled @ 9″ O.C.)
| Mortairvent® Weep Screed |
Length (feet) | Pieces Per Box | Pieces Per Pallet | UOM |
|---|---|---|---|---|
| White | 10’ | 35 (350 LF) | 700 | Lineal Foot |
| Gray | 10’ | 35 (350 LF) | 700 | Lineal Foot |
